The Get property provide a more efficient way to convert Image<Gray, Byte>, Image<Bgr, Byte> and Image<Bgra, Byte> into Bitmap such that the image data is shared with Bitmap. If you change the pixel value on the Bitmap, you change the pixel values on the Image object as well! For other types of image this property has the same effect as ToBitmap() Take extra caution not to use the Bitmap after the Image object is disposed The Set property convert the bitmap to this Image type.

Get or Set an Array of bytes that represent the data in this array

The number of cols for this array

Get the equivalent opencv depth type for this image

Get or Set the data for this matrix. The Get function has O(1) complexity. The Set function make a copy of the data

Get the height (#Rows) of the cvArray. If ROI is set, the height of the ROI

Indicates if the region of interest has been set

Get or Set the color in the location

Get or Set the specific channel of the current image. For Get operation, a copy of the specific channel is returned. For Set operation, the specific channel is copied to this image.

Get or Set the color in the rowth row (y direction) and columnth column (x direction)

Get the underneath managed array

The IplImage structure

The norm of this Array

Get the number of channels for this image

The pointer to the internal structure

Get or Set the region of interest for this image. To clear the ROI, set it to System.Drawing.Rectangle.Empty

The number of rows for this array

Get or set the Compression Ratio for serialization. A number between 0 - 9. 0 means no compression at all, while 9 means best compression

Get the size of the array

Sum of diagonal elements of the matrix

Get the width (#Cols) of the cvArray. If ROI is set, the width of the ROI