http://www.emgu.com

Overload List

  NameDescription
Public methodUndistort<(Of <<'(TColor, TDepth>)>>)(Image<(Of <<'(TColor, TDepth>)>>))
Transforms the image to compensate radial and tangential lens distortion. The camera matrix and distortion parameters can be determined using cvCalibrateCamera2. For every pixel in the output image the function computes coordinates of the corresponding location in the input image using the formulae in the section beginning. Then, the pixel value is computed using bilinear interpolation. If the resolution of images is different from what was used at the calibration stage, fx, fy, cx and cy need to be adjusted appropriately, while the distortion coefficients remain the same
Public methodUndistort(array<PointF>[]()[][], Matrix<(Of <<'(Double>)>>), Matrix<(Of <<'(Double>)>>))
Similar to cvInitUndistortRectifyMap and is opposite to it at the same time. The functions are similar in that they both are used to correct lens distortion and to perform the optional perspective (rectification) transformation. They are opposite because the function cvInitUndistortRectifyMap does actually perform the reverse transformation in order to initialize the maps properly, while this function does the forward transformation.

See Also