| Member name | Value | Description |
---|
| DC1394Off | -4 |
Turn the feature off (not controlled manually nor automatically)
|
| DC1394ModeManual | -3 |
Set automatically when a value of the feature is set by the user
|
| DC1394ModeAuto | -2 |
DC1394 mode auto
|
| DC1394ModeOnePushAuto | -1 |
DC1394 mode one push auto
|
| PosMsec | 0 |
Film current position in milliseconds or video capture timestamp
|
| PosFrames | 1 |
0-based index of the frame to be decoded/captured next
|
| PosAviRatio | 2 |
Relative position of the video file: 0=start of the film, 1=end of the film.
|
| FrameWidth | 3 |
Width of frames in the video stream
|
| FrameHeight | 4 |
Height of frames in the video stream
|
| Fps | 5 |
Frame rate
|
| FourCC | 6 |
4-character code of codec
|
| FrameCount | 7 |
Number of frames in video file
|
| Format | 8 |
Format of the %Mat objects returned by VideoCapture::retrieve().
|
| Mode | 9 |
Backend-specific value indicating the current capture mode.
|
| Brightness | 10 |
Brightness of the image (only for those cameras that support).
|
| Contrast | 11 |
Contrast of the image (only for cameras).
|
| Saturation | 12 |
Saturation of the image (only for cameras).
|
| Hue | 13 |
Hue of the image (only for cameras).
|
| Gain | 14 |
Gain of the image (only for those cameras that support).
|
| Exposure | 15 |
Exposure (only for those cameras that support).
|
| ConvertRgb | 16 |
Boolean flags indicating whether images should be converted to RGB.
|
| WhiteBalanceBlueU | 17 |
Currently unsupported.
|
| Rectification | 18 |
Rectification flag for stereo cameras (note: only supported by DC1394 v 2.x backend currently).
|
| Monochrome | 19 |
Monochrome
|
| Sharpness | 20 |
Sharpness
|
| AutoExposure | 21 |
Exposure control done by camera, user can adjust reference level using this feature
|
| Gamma | 22 |
Gamma
|
| Temperature | 23 |
Temperature
|
| Trigger | 24 |
Trigger
|
| TriggerDelay | 25 |
Trigger delay
|
| WhiteBalanceRedV | 26 |
White balance red v
|
| Zoom | 27 |
Zoom
|
| Focus | 28 |
Focus
|
| Guid | 29 |
GUID
|
| IsoSpeed | 30 |
ISO SPEED
|
| MaxDC1394 | 31 |
MAX DC1394
|
| Backlight | 32 |
Backlight
|
| Pan | 33 |
Pan
|
| Tilt | 34 |
Tilt
|
| Roll | 35 |
Roll
|
| Iris | 36 |
Iris
|
| Settings | 37 |
Pop up video/camera filter dialog (note: only supported by DSHOW backend currently. The property value is ignored)
|
| Buffersuze | 38 |
Buffer size
|
| Autofocus | 39 |
Auto focus
|
| SarNum | 40 |
Sample aspect ratio: num/den (num)
|
| SarDen | 41 |
Sample aspect ratio: num/den (den)
|
| Backend | 42 |
Current backend (enum VideoCaptureAPIs). Read-only property
|
| Channel | 43 |
Video input or Channel Number (only for those cameras that support)
|
| AutoWb | 44 |
Enable/ disable auto white-balance
|
| WbTemperature | 45 |
White-balance color temperature
|
| Autograb | 1024 |
property for highgui class CvCapture_Android only
|
| SupportedPreviewSizesString | 1025 |
readonly, tricky property, returns cpnst char* indeed
|
| PreviewFormat | 1026 |
readonly, tricky property, returns cpnst char* indeed
|
| OpenniDepthGenerator | -2147483648 |
OpenNI depth generator
|
| OpenniImageGenerator | 1073741824 |
OpenNI image generator
|
| OpenniIRGenerator | 536870912 |
OpenNI IR generator
|
| OpenniGeneratorsMask | -536870912 |
OpenNI map generators
|
| OpenniOutputMode | 100 |
Properties of cameras available through OpenNI interfaces
|
| OpenniFrameMaxDepth | 101 |
Properties of cameras available through OpenNI interfaces, in mm.
|
| OpenniBaseline | 102 |
Properties of cameras available through OpenNI interfaces, in mm.
|
| OpenniFocalLength | 103 |
Properties of cameras available through OpenNI interfaces, in pixels.
|
| OpenniRegistration | 104 |
Flag that synchronizes the remapping depth map to image map
by changing depth generator's view point (if the flag is "on") or
sets this view point to its normal one (if the flag is "off").
|
| OpenniRegistrationOn | 104 |
Flag that synchronizes the remapping depth map to image map
by changing depth generator's view point (if the flag is "on") or
sets this view point to its normal one (if the flag is "off").
|
| OpenniApproxFrameSync | 105 |
Approx frame sync
|
| OpenniMaxBufferSize | 106 |
Max buffer size
|
| OpenniCircleBuffer | 107 |
Circle buffer
|
| OpenniMaxTimeDuration | 108 |
Max time duration
|
| OpenniGeneratorPresent | 109 |
Generator present
|
| Openni2Sync | 110 |
OpenNI2 Sync
|
| Openni2Mirror | 111 |
OpenNI2 Mirror
|
| OpenniImageGeneratorPresent | 1073741933 |
Openni image generator present
|
| OpenniImageGeneratorOutputMode | 1073741924 |
Image generator output mode
|
| OpenniDepthGeneratorPresent | -2147483539 |
Depth generator present
|
| OpenniDepthGeneratorBaseline | -2147483546 |
Depth generator baseline, in mm.
|
| OpenniDepthGeneratorFocalLength | -2147483545 |
Depth generator focal length, in pixels.
|
| OpenniDepthGeneratorRegistration | -2147483544 |
Openni generator registration
|
| OpenniDepthGeneratorRegistrationOn | -2147483544 |
Openni generator registration on
|
| OpenniIRGeneratorPresent | 536871021 |
Openni IR generator present
|
| GstreamerQueueLength | 200 |
Properties of cameras available through GStreamer interface. Default is 1
|
| PvapiMulticastip | 300 |
Ip for enable multicast master mode. 0 for disable multicast
|
| PvapiFrameStartTriggerMode | 301 |
FrameStartTriggerMode: Determines how a frame is initiated
|
| PvapiDecimationHorizontal | 302 |
Horizontal sub-sampling of the image
|
| PvapiDecimationVertical | 303 |
Vertical sub-sampling of the image
|
| PvapiBinningX | 304 |
Horizontal binning factor
|
| PvapiBinningY | 305 |
Vertical binning factor
|
| PvapiPixelFormat | 306 |
Pixel format
|
| XiDownsampling | 400 |
Change image resolution by binning or skipping.
|
| XiDataFormat | 401 |
Output data format
|
| XiOffsetX | 402 |
Horizontal offset from the origin to the area of interest (in pixels).
|
| XiOffsetY | 403 |
Vertical offset from the origin to the area of interest (in pixels).
|
| XiTrgSource | 404 |
Defines source of trigger.
|
| XiTrgSoftware | 405 |
Generates an internal trigger. PRM_TRG_SOURCE must be set to TRG_SOFTWARE.
|
| XiGpiSelector | 406 |
Selects general purpose input
|
| XiGpiMode | 407 |
Set general purpose input mode
|
| XiGpiLevel | 408 |
Get general purpose level
|
| XiGpoSelector | 409 |
Selects general purpose output
|
| XiGpoMode | 410 |
Set general purpose output mode
|
| XiLedSelector | 411 |
Selects camera signaling LED
|
| XiLedMode | 412 |
Define camera signaling LED functionality
|
| XiManualWb | 413 |
Calculates White Balance(must be called during acquisition)
|
| XiAutoWb | 414 |
Automatic white balance
|
| XiAeag | 415 |
Automatic exposure/gain
|
| XiExpPriority | 416 |
Exposure priority (0.5 - exposure 50%, gain 50%).
|
| XiAeMaxLimit | 417 |
Maximum limit of exposure in AEAG procedure
|
| XiAgMaxLimit | 418 |
Maximum limit of gain in AEAG procedure
|
| XiAeagLevel | 419 |
Average intensity of output signal AEAG should achieve(in %)
|
| XiTimeout | 420 |
Image capture timeout in milliseconds
|
| XiExposure | 421 |
Exposure time in microseconds
|
| XiExposureBurstCount | 422 |
Sets the number of times of exposure in one frame.
|
| XiGainSelector | 423 |
Gain selector for parameter Gain allows to select different type of gains.
|
| XiGain | 424 |
Gain in dB
|
| XiDownsamplingType | 426 |
Change image downsampling type.
|
| XiBinningSelector | 427 |
Binning engine selector.
|
| XiBinningVertical | 428 |
Vertical Binning - number of vertical photo-sensitive cells to combine together.
|
| XiBinningHorizontal | 429 |
Horizontal Binning - number of horizontal photo-sensitive cells to combine together.
|
| XiBinningPattern | 430 |
Binning pattern type.
|
| XiDecimationSelector | 431 |
Decimation engine selector.
|
| XiDecimationVertical | 432 |
Vertical Decimation - vertical sub-sampling of the image - reduces the vertical resolution of the image by the specified vertical decimation factor.
|
| XiDecimationHorizontal | 433 |
Horizontal Decimation - horizontal sub-sampling of the image - reduces the horizontal resolution of the image by the specified vertical decimation factor.
|
| XiDecimationPattern | 434 |
Decimation pattern type.
|
| XiTestPatternGeneratorSelector | 587 |
Selects which test pattern generator is controlled by the TestPattern feature.
|
| XiTestPattern | 588 |
Selects which test pattern type is generated by the selected generator.
|
| XiImageDataFormat | 435 |
Output data format.
|
| XiShutterType | 436 |
Change sensor shutter type(CMOS sensor).
|
| XiSensorTaps | 437 |
Number of taps
|
| XiAeagRoiOffsetX | 439 |
Automatic exposure/gain ROI offset X
|
| XiAeagRoiOffsetY | 440 |
Automatic exposure/gain ROI offset Y
|
| XiAeagRoiWidth | 441 |
Automatic exposure/gain ROI Width
|
| XiAeagRoiHeight | 442 |
Automatic exposure/gain ROI Height
|
| XiBpc | 445 |
Correction of bad pixels
|
| XiWbKr | 448 |
White balance red coefficient
|
| XiWbKg | 449 |
White balance green coefficient
|
| XiWbKb | 450 |
White balance blue coefficient
|
| XiWidth | 451 |
Width of the Image provided by the device (in pixels).
|
| XiHeight | 452 |
Height of the Image provided by the device (in pixels).
|
| XiRegionSelector | 589 |
Selects Region in Multiple ROI which parameters are set by width, height, ... ,region mode
|
| XiRegionMode | 595 |
Activates/deactivates Region selected by Region Selector
|
| XiLimitBandwidth | 459 |
Set/get bandwidth(datarate)(in Megabits)
|
| XiSensorDataBitDepth | 460 |
Sensor output data bit depth.
|
| XiOutputDataBitDepth | 461 |
Device output data bit depth.
|
| XiImageDataBitDepth | 462 |
bitdepth of data returned by function xiGetImage
|
| XiOutputDataPacking | 463 |
Device output data packing (or grouping) enabled. Packing could be enabled if output_data_bit_depth > 8 and packing capability is available.
|
| XiOutputDataPackingType | 464 |
Data packing type. Some cameras supports only specific packing type.
|
| XiIsCooled | 465 |
Returns 1 for cameras that support cooling.
|
| XiCooling | 466 |
Start camera cooling.
|
| XiTargetTemp | 467 |
Set sensor target temperature for cooling.
|
| XiChipTemp | 468 |
Camera sensor temperature
|
| XiHousTemp | 469 |
Camera housing temperature
|
| XiHousBackSideTemp | 590 |
Camera housing back side temperature
|
| XiSensorBoardTemp | 596 |
Camera sensor board temperature
|
| XiCms | 470 |
Mode of color management system.
|
| XiApplyCms | 471 |
Enable applying of CMS profiles to xiGetImage (see XI_PRM_INPUT_CMS_PROFILE, XI_PRM_OUTPUT_CMS_PROFILE).
|
| XiImageIsColor | 474 |
Returns 1 for color cameras.
|
| XiColorFilterArray | 475 |
Returns color filter array type of RAW data.
|
| XiGammay | 476 |
Luminosity gamma
|
| XiGammac | 477 |
Chromaticity gamma
|
| XiSharpness | 478 |
Sharpness Strength
|
| XiCcMatrix00 | 479 |
Color Correction Matrix element [0][0]
|
| XiCcMatrix01 | 480 |
Color Correction Matrix element [0][1]
|
| XiCcMatrix02 | 481 |
Color Correction Matrix element [0][2]
|
| XiCcMatrix03 | 482 |
Color Correction Matrix element [0][3]
|
| XiCcMatrix10 | 483 |
Color Correction Matrix element [1][0]
|
| XiCcMatrix11 | 484 |
Color Correction Matrix element [1][1]
|
| XiCcMatrix12 | 485 |
Color Correction Matrix element [1][2]
|
| XiCcMatrix13 | 486 |
Color Correction Matrix element [1][3]
|
| XiCcMatrix20 | 487 |
Color Correction Matrix element [2][0]
|
| XiCcMatrix21 | 488 |
Color Correction Matrix element [2][1]
|
| XiCcMatrix22 | 489 |
Color Correction Matrix element [2][2]
|
| XiCcMatrix23 | 490 |
Color Correction Matrix element [2][3]
|
| XiCcMatrix30 | 491 |
Color Correction Matrix element [3][0]
|
| XiCcMatrix31 | 492 |
Color Correction Matrix element [3][1]
|
| XiCcMatrix32 | 493 |
Color Correction Matrix element [3][2]
|
| XiCcMatrix33 | 494 |
Color Correction Matrix element [3][3]
|
| XiDefaultCcMatrix | 495 |
Set default Color Correction Matrix
|
| XiTrgSelector | 498 |
Selects the type of trigger.
|
| XiAcqFrameBurstCount | 499 |
Sets number of frames acquired by burst. This burst is used only if trigger is set to FrameBurstStart
|
| XiDebounceEn | 507 |
Enable/Disable debounce to selected GPI
|
| XiDebounceT0 | 508 |
Debounce time (x * 10us)
|
| XiDebounceT1 | 509 |
Debounce time (x * 10us)
|
| XiDebouncePol | 510 |
Debounce polarity (pol = 1 t0 - falling edge, t1 - rising edge)
|
| XiLensMode | 511 |
Status of lens control interface. This shall be set to XI_ON before any Lens operations.
|
| XiLensApertureValue | 512 |
Current lens aperture value in stops. Examples: 2.8, 4, 5.6, 8, 11
|
| XiLensFocusMovementValue | 513 |
Lens current focus movement value to be used by XI_PRM_LENS_FOCUS_MOVE in motor steps.
|
| XiLensFocusMove | 514 |
Moves lens focus motor by steps set in XI_PRM_LENS_FOCUS_MOVEMENT_VALUE.
|
| XiLensFocusDistance | 515 |
Lens focus distance in cm.
|
| XiLensFocalLength | 516 |
Lens focal distance in mm.
|
| XiLensFeatureSelector | 517 |
Selects the current feature which is accessible by XI_PRM_LENS_FEATURE.
|
| XiLensFeature | 518 |
Allows access to lens feature value currently selected by XI_PRM_LENS_FEATURE_SELECTOR.
|
| XiDeviceModelId | 521 |
Return device model id
|
| XiDeviceSn | 522 |
Return device serial number
|
| XiImageDataFormatRgb32Alpha | 529 |
The alpha channel of RGB32 output image format.
|
| XiImagePayloadSize | 530 |
Buffer size in bytes sufficient for output image returned by xiGetImage
|
| XiTransportPixelFormat | 531 |
Current format of pixels on transport layer.
|
| XiSensorClockFreqHz | 532 |
Sensor clock frequency in Hz.
|
| XiSensorClockFreqIndex | 533 |
Sensor clock frequency index. Sensor with selected frequencies have possibility to set the frequency only by this index.
|
| XiSensorOutputChannelCount | 534 |
Number of output channels from sensor used for data transfer.
|
| XiFramerate | 535 |
Define framerate in Hz
|
| XiCounterSelector | 536 |
Select counter
|
| XiCounterValue | 537 |
Counter status
|
| XiAcqTimingMode | 538 |
Type of sensor frames timing.
|
| XiAvailableBandwidth | 539 |
Calculate and return available interface bandwidth(int Megabits)
|
| XiBufferPolicy | 540 |
Data move policy
|
| XiLutEn | 541 |
Activates LUT.
|
| XiLutIndex | 542 |
Control the index (offset) of the coefficient to access in the LUT.
|
| XiLutValue | 543 |
Value at entry LUTIndex of the LUT
|
| XiTrgDelay | 544 |
Specifies the delay in microseconds (us) to apply after the trigger reception before activating it.
|
| XiTsRstMode | 545 |
Defines how time stamp reset engine will be armed
|
| XiTsRstSource | 546 |
Defines which source will be used for timestamp reset. Writing this parameter will trigger settings of engine (arming)
|
| XiIsDeviceExist | 547 |
Returns 1 if camera connected and works properly.
|
| XiAcqBufferSize | 548 |
Acquisition buffer size in buffer_size_unit. Default bytes.
|
| XiAcqBufferSizeUnit | 549 |
Acquisition buffer size unit in bytes. Default 1. E.g. Value 1024 means that buffer_size is in KiBytes
|
| XiAcqTransportBufferSize | 550 |
Acquisition transport buffer size in bytes
|
| XiBuffersQueueSize | 551 |
Queue of field/frame buffers
|
| XiAcqTransportBufferCommit | 552 |
Number of buffers to commit to low level
|
| XiRecentFrame | 553 |
GetImage returns most recent frame
|
| XiDeviceReset | 554 |
Resets the camera to default state.
|
| XiColumnFpnCorrection | 555 |
Correction of column FPN
|
| XiRowFpnCorrection | 591 |
Correction of row FPN
|
| XiSensorMode | 558 |
Current sensor mode. Allows to select sensor mode by one integer. Setting of this parameter affects: image dimensions and downsampling.
|
| XiHdr | 559 |
Enable High Dynamic Range feature.
|
| XiHdrKneepointCount | 560 |
The number of kneepoints in the PWLR.
|
| XiHdrT1 | 561 |
position of first kneepoint(in % of XI_PRM_EXPOSURE)
|
| XiHdrT2 | 562 |
position of second kneepoint (in % of XI_PRM_EXPOSURE)
|
| XiKneepoint1 | 563 |
value of first kneepoint (% of sensor saturation)
|
| XiKneepoint2 | 564 |
value of second kneepoint (% of sensor saturation)
|
| XiImageBlackLevel | 565 |
Last image black level counts. Can be used for Offline processing to recall it.
|
| XiHwRevision | 571 |
Returns hardware revision number.
|
| XiDebugLevel | 572 |
Set debug level
|
| XiAutoBandwidthCalculation | 573 |
Automatic bandwidth calculation,
|
| XiFfsFileId | 594 |
File number.
|
| XiFfsFileSize | 580 |
Size of file.
|
| XiFreeFfsSize | 581 |
Size of free camera FFS.
|
| XiUsedFfsSize | 582 |
Size of used camera FFS.
|
| XiFfsAccessKey | 583 |
Setting of key enables file operations on some cameras.
|
| XiSensorFeatureSelector | 585 |
Selects the current feature which is accessible by XI_PRM_SENSOR_FEATURE_VALUE.
|
| XiSensorFeatureValue | 586 |
Allows access to sensor feature value currently selected by XI_PRM_SENSOR_FEATURE_SELECTOR.
|
| AndroidFlashMode | 8001 |
Android flash mode
|
| AndroidFocusMode | 8002 |
Android focus mode
|
| AndroidWhiteBalance | 8003 |
Android white balance
|
| AndroidAntibanding | 8004 |
Android anti banding
|
| AndroidFocalLength | 8005 |
Android focal length
|
| AndroidFocusDistanceNear | 8006 |
Android focus distance near
|
| AndroidFocusDistanceOptimal | 8007 |
Android focus distance optimal
|
| AndroidFocusDistanceFar | 8008 |
Android focus distance far
|
| AndroidExposeLock | 8009 |
Android expose lock
|
| AndroidWhitebalanceLock | 8010 |
Android white balance lock
|
| IOSDeviceFocus | 9001 |
iOS device focus
|
| IOSDeviceExposure | 9002 |
iOS device exposure
|
| IOSDeviceFlash | 9003 |
iOS device flash
|
| IOSDeviceWhitebalance | 9004 |
iOS device white-balance
|
| IOSDeviceTorch | 9005 |
iOS device torch
|
| GigaFrameOffsetX | 10001 |
Smartek Giganetix Ethernet Vision: frame offset X
|
| GigaFrameOffsetY | 10002 |
Smartek Giganetix Ethernet Vision: frame offset Y
|
| GigaFrameWidthMax | 10003 |
Smartek Giganetix Ethernet Vision: frame width max
|
| GigaFrameHeighMax | 10004 |
Smartek Giganetix Ethernet Vision: frame height max
|
| GigaFrameSensWidth | 10005 |
Smartek Giganetix Ethernet Vision: frame sens width
|
| GigaFrameSensHeigh | 10006 |
Smartek Giganetix Ethernet Vision: frame sens height
|
| IntelpercProfileCount | 11001 |
Intelperc Profile Count
|
| IntelpercProfileIdx | 11002 |
Intelperc Profile Idx
|
| IntelpercDepthLowConfidenceValue | 11003 |
Intelperc Depth Low Confidence Value
|
| IntelpercDepthSaturationValue | 11004 |
Intelperc Depth Saturation Value
|
| IntelpercDepthConfidenceThreshold | 11005 |
Intelperc Depth Confidence Threshold
|
| IntelpercDepthFocalLengthHorz | 11006 |
Intelperc Depth Focal Length Horz
|
| IntelpercDepthFocalLengthVert | 11007 |
Intelperc Depth Focal Length Vert
|
| IntelpercDepthGenerator | 536870912 |
Intelperc Depth Generator
|
| IntelpercImageGenerator | 268435456 |
Intelperc Image Generator
|
| IntelpercGeneratorsMask | 805306368 |
Intelperc Generators Mask
|