Click or drag to resize
CapProp Enumeration
http://www.emgu.com
CV Capture property identifier

Namespace: Emgu.CV.CvEnum
Assembly: Emgu.CV.World (in Emgu.CV.World.dll) Version: 3.1.0.2282 (3.1.0.2282)
Syntax
public enum CapProp
Members
  Member nameValueDescription
DC1394Off-4 Turn the feature off (not controlled manually nor automatically)
DC1394ModeManual-3 Set automatically when a value of the feature is set by the user
DC1394ModeAuto-2 DC1394 mode auto
DC1394ModeOnePushAuto-1 DC1394 mode one push auto
PosMsec0 Film current position in milliseconds or video capture timestamp
PosFrames1 0-based index of the frame to be decoded/captured next
PosAviRatio2 Position in relative units (0 - start of the file, 1 - end of the file)
FrameWidth3 Width of frames in the video stream
FrameHeight4 Height of frames in the video stream
Fps5 Frame rate
FourCC6 4-character code of codec
FrameCount7 Number of frames in video file
Format8 Format
Mode9 Mode
Brightness10 Brightness
Contrast11 Contrast
Staturation12 Saturation
Hue13 Hue
Gain14 Gain
Exposure15 Exposure
ConvertRgb16 Convert RGB
WhiteBalanceBlueU17 White balance blue u
Rectification18 Rectification
Monochrome19 Monochrome
Sharpness20 Sharpness
AutoExposure21 Exposure control done by camera, user can adjust reference level using this feature
Gamma22 Gamma
Temperature23 Temperature
Trigger24 Trigger
TriggerDelay25 Trigger delay
WhiteBalanceRedV26 White balance red v
Zoom27 Zoom
Focus28 Focus
Guid29 GUID
IsoSpeed30 ISO SPEED
MaxDC139431 MAX DC1394
Backlight32 Backlight
Pan33 Pan
Tilt34 Tilt
Roll35 Roll
Iris36 Iris
Settings37 Settings
Autograb1024 property for highgui class CvCapture_Android only
SupportedPreviewSizesString1025 readonly, tricky property, returns cpnst char* indeed
PreviewFormat1026 readonly, tricky property, returns cpnst char* indeed
OpenniDepthGenerator-2147483648 OpenNI map generators
OpenniImageGenerator1073741824 OpenNI map generators
OpenniGeneratorsMask-1073741824 OpenNI map generators
OpenniOutputMode100 Properties of cameras available through OpenNI interfaces
OpenniFrameMaxDepth101 Properties of cameras available through OpenNI interfaces, in mm.
OpenniBaseline102 Properties of cameras available through OpenNI interfaces, in mm.
OpenniFocalLength103 Properties of cameras available through OpenNI interfaces, in pixels.
OpenniRegistration104 Flag that synchronizes the remapping depth map to image map by changing depth generator's view point (if the flag is "on") or sets this view point to its normal one (if the flag is "off").
OpenniRegistrationOn104 Flag that synchronizes the remapping depth map to image map by changing depth generator's view point (if the flag is "on") or sets this view point to its normal one (if the flag is "off").
OpenniApproxFrameSync105 Approx frame sync
OpenniMaxBufferSize106 Max buffer size
OpenniCircleBuffer107 Circle buffer
OpenniMaxTimeDuration108 Max time duration
OpenniGeneratorPresent109 Generator present
OpenniImageGeneratorPresent1073741933 Openni image generator present
OpenniImageGeneratorOutputMode1073741924 Image generator output mode
OpenniDepthGeneratorBaseline-2147483546 Depth generator baseline, in mm.
OpenniDepthGeneratorFocalLength-2147483545 Depth generator focal length, in pixels.
OpenniDepthGeneratorRegistration-2147483544 Openni generator registration
OpenniDepthGeneratorRegistrationOn-2147483544 Openni generator registration on
GstreamerQueueLength200 Properties of cameras available through GStreamer interface. Default is 1
PvapiMulticastip300 Ip for enable multicast master mode. 0 for disable multicast
XiDownsampling400 Change image resolution by binning or skipping.
XiDataFormat401 Output data format
XiOffsetX402 Horizontal offset from the origin to the area of interest (in pixels).
XiOffsetY403 Vertical offset from the origin to the area of interest (in pixels).
XiTrgSource404 Defines source of trigger.
XiTrgSoftware405 Generates an internal trigger. PRM_TRG_SOURCE must be set to TRG_SOFTWARE.
XiGpiSelector406 Selects general purpose input
XiGpiMode407 Set general purpose input mode
XiGpiLevel408 Get general purpose level
XiGpoSelector409 Selects general purpose output
XiGpoMode410 Set general purpose output mode
XiLedSelector411 Selects camera signaling LED
XiLedMode412 Define camera signaling LED functionality
XiManualWb413 Calculates White Balance(must be called during acquisition)
XiAutoWb414 Automatic white balance
XiAeag415 Automatic exposure/gain
XiExpPriority416 Exposure priority (0.5 - exposure 50%, gain 50%).
XiAeMaxLimit417 Maximum limit of exposure in AEAG procedure
XiAgMaxLimit418 Maximum limit of gain in AEAG procedure
XiAeagLevel419 Average intensity of output signal AEAG should achieve(in %)
XiTimeout420 Image capture timeout in milliseconds
AndroidFlashMode8001 Android flash mode
AndroidFocusMode8002 Android focus mode
AndroidWhiteBalance8003 Android white balance
AndroidAntibanding8004 Android anti banding
AndroidFocalLength8005 Android focal length
AndroidFocusDistanceNear8006 Android focus distance near
AndroidFocusDistanceOptimal8007 Android focus distance optimal
AndroidFocusDistanceFar8008 Android focus distance far
IOSDeviceFocus9001 iOS device focus
IOSDeviceExposure9002 iOS device exposure
IOSDeviceFlash9003 iOS device flash
IOSDeviceWhitebalance9004 iOS device white-balance
IOSDeviceTorch9005 iOS device torch
GigaFrameOffsetX10001 Smartek Giganetix Ethernet Vision: frame offset X
GigaFrameOffsetY10002 Smartek Giganetix Ethernet Vision: frame offset Y
GigaFrameWidthMax10003 Smartek Giganetix Ethernet Vision: frame width max
GigaFrameHeighMax10004 Smartek Giganetix Ethernet Vision: frame height max
GigaFrameSensWidth10005 Smartek Giganetix Ethernet Vision: frame sens width
GigaFrameSensHeigh10006 Smartek Giganetix Ethernet Vision: frame sens height
See Also